Suburban 6 Gallon Water Heater SW6DEA

[SW6DEA]
About this product...
  • Suburban 6 Gallon Water Heater SW6DEAShipping Cost
  • Customer Reviews
  • Suburban
  • Ask a question
Manufacturer's Number: 5052A 5089A 5085A
Calculate Shipping
The Suburban SWDEA features a steel tank with porcelain lining. Replaceable anode rod for corrosion protection.

All Suburban RV Hot Water Systems have a porcelain-lined, high tensile steel tank which are pressure tested twice for assurance of tank integrity and a long life.

All Suburban RV Hot Water Systems have an anode rod which absorbs all the corrosive action of hot water. It is located on the bottom of HWS under the main burner, you simply unscrew this to drain the tank of water. If the rod is mostly eaten away, simply replace it with a new one.

Easy access, Foam tank insulation and high recovery rate.
Direct Spark ignition for gas and an Electric Element.
Spare parts are available.
Specifications
22.6 litre capacity
Dimensions H320mm x W320mm x ( D500mm plus pipe connections at rear)
Recovery = 35mins on gas.
Cold water inlet is 1/2 inch female NPT.
Hot water outlet is 1/2 inch female NPT.
Anode Thread is 3/4 inch female NPT.
240 volt - 50 HZ AC, 1440 watts - 6 amp for Electrical (no time quoted).
WARNING: This product may contain one or more chemicals known in the State of California to cause cancer and/or birth defects or other reproductive harm. For more information, visit www.P65Warnings.ca.gov