Ranch Hitch Adapter 5th Wheel Gooseneck RV Trailer Camper 3100

[S038-971019]
About this product...
  • Ranch Hitch Adapter 5th Wheel Gooseneck RV Trailer Camper 3100Shipping Cost
  • Customer Reviews
  • Andersen Manufacturing
  • Ask a question
Manufacturer's Number: 3100
Calculate Shipping

New in Box with Full Manufacture's Warranty.

AM Ranch Hitch Adapter  |  3100-HitchAdapter

The Only remote (cable) control adapter in the industry!The perfect adapter for farmers and ranchers with gooseneck or 5th wheel trailers.

Adapter fits standard 2-5/16” hitch balls and features a 3” vertical adjustment and the only adapter on the market with a remote latch release!

The ranch hitch adapter offers the greatest amount of strength and versatility offered by any other hitch system. 24,000 lb trailer GVW and 6,000 lb tongue weight. Kit Includes All Hardware for Attachments to 5th Wheel Trailers. Easy Install.

The installation is simple and takes roughly an hour to complete. To see if the adapter will fit your 5th wheel, do the following: Back your truck into position to hook up your 5th wheel. Measure from the "pin plate" (the bottom of the pin box) down to the top of the ball in the bed of your truck. When the adapter is fully compressed that measurement is 11 3/4". It has 3" of adjustment, so when it is fully extended that measurement will be 14 3/4". You should have 5" or 6" of clearance between the over-hang of the trailer and the sideboards of your truck, keeping in mind your 5th wheel should be level for traveling.

The Ranch Hitch Adapter is very easy to use. Most gooseneck receivers require you to get into the bed of your truck to latch the coupler; not so with the Ranch Hitch Adapter. The remote cable mechanism allows you to engage and release the coupler while standing on the ground outside your pickup. The bell shaped receiver allows for the hitch ball and adapter to be as much as 3" off center, and still slide into place correctly. With 3" of vertical adjustment you can be sure your trailer matches up level with your truck.  Not recommended for use on pin boxes longer than 30"